Multi-Unit Abutments

Articles and cases on multi-unit abutments (MUA): choosing between straight and angled, biomechanics, complications and full-arch protocols. Most read: angled vs straight abutments: stress and bone loss, why MUA screws loosen and how to prevent it, V-Type MUA clinical cases and tilted implants with angled abutments. The full XGATE range — V-Type straight and D-Type 17°, 30°, 45° for 15 implant platforms — is in the Multi-Units catalog.

#Tags

CAD/CAM Dental Implants Digital Dentistry Full-Arch Immediate Loading Implant Complications Implant Design Implant Prosthetics Libraries Multi-Unit Abutments Multi-Unit Sleeve Osseointegration Prosthetic Materials Screw Retained Restoration Video Guide

July 15, 2025 Implant Complications Multi-Unit Abutments Screw Retained Restoration

Screw Retention on Multi-Unit Abutments: What Happens to Implants, Screws, and Bone Tissue Under Vertical and Horizontal Loads

Research on straight and angled MUAs (0°, 17°, 30°) In this article, we will analyze how the load on dental prostheses is distributed across the components of the restoration. We will determine under what conditions the risk of screw breakage increases and which screw will…

June 9, 2025 Implant Prosthetics Multi-Unit Abutments Screw Retained Restoration

Advantages of Ultra-Compact MUA V-Type Solutions: Clinical Examples

For those unfamiliar with XGate Dental products, it may not be immediately apparent how V-type multi-unit abutments can address specific challenges in dental practice. This article presents several clinical cases demonstrating the application of MUA V-type solutions, valuable for both novice and experienced practitioners. See…

April 25, 2020 CAD/CAM Libraries Multi-Unit Abutments Video Guide

D-Type Multi Unit Modeling Without Sleeve

In the video we present workflow from downloading the CAD/CAM libraries to install and use them.

April 25, 2020 CAD/CAM Libraries Multi-Unit Abutments Video Guide

Choosing the right D-type Multi unit height

In the video we present workflow from downloading the CAD/CAM libraries to install and use them.

April 25, 2020 CAD/CAM Libraries Multi-Unit Abutments Video Guide

Choosing the right V-type Multi unit height

In the video we present workflow from downloading the CAD/CAM libraries to install and use them.

April 25, 2020 CAD/CAM Libraries Multi-Unit Abutments Video Guide

Choosing between different type of sleeves for V-type Multi units

In the video we present workflow from downloading the CAD/CAM libraries to install and use them.

Disclaimer

Clinical cases and articles published on this website are intended for dental professionals and are provided for informational and educational purposes only. They describe the individual experience of the treating clinician and do not constitute medical advice, a treatment recommendation, or a guarantee of outcome. Results depend on patient anatomy, clinical indication, and the technique applied.

XGATE Dental products must be used in accordance with the current Instructions for Use. Product availability and regulatory clearance vary by country; not all products shown are available in every market. Third-party trademarks and implant system names are used solely to indicate dimensional compatibility and remain the property of their respective owners. XGATE Dental is not affiliated with, endorsed by, or sponsored by these manufacturers.